Finely polishes treated water to premium quality for drinking and cooking.
Designed with the unique Micro-Pure® technology, the S-100 reduces the following contaminants:
Reduces chlorine taste and odor.
Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides.
Reduces parasitic protozoan cysts such as Giardia, Entamoeba, Cryptosporidium.
Reduces common earth, moldy, fishy tastes and odors.
Features
Sanitary cartridge replacement is simple, quick and clean, Internal filter parts are never exposed to handling or contamination
No electrical connection required
Built-in water shutoff
A lower operating cost that is below the price of bottled water
NSF Certified under NSF/ANSI Standards 42 and 53
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42 and 53.
Specifications
Service flow rate: maximum 0.5 gpm (1.9 Lpm)
Pressure Requirements: 10 psi – 125 psi (0.7 – 8.6 bar), non-shock
Maximum Temperature: 35°F – 100°F(2-38°C)
Capacity: 1,500 gallons (5,670 liters)
Height of cartridge body: 12.75″
Overall Dimensions: 14.5″H x 3.25″Ø
Operation Tips
Change cartridges at least annually
Change cartridges when capacity is reached or when pressure falls below 10 psi
Service flow rate must not exceed 0.5 gpm
Always flush the filter cartridge at time of installation and cartridge change
Warranty
A full year warranty against defects in material and workmanship is provided by the manufacturer.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Reviews
There are no reviews yet.